How To Paint A Fishing Rod
How To Paint A Fishing Rod. The rod blanks are yellow. Folks have used white shoe polish, acrylic paint, powdered water color paints, tempra, and a whole host of others.
How to spray paint a fishing rod! You may find holding the brush still and rotating the rod in your hand is easier than painting in the normal way. Building your own fishing rod is much easier, and more affordable, than many fisherman think.
I Was Thinking Get Od Green Paint The Blank Then Do My Pattren, Or Paint Blank And Do Some Marbling On It Any Other Ideas Would Be Cool Thanks Eric
The rod blanks are yellow. After working your way from ring to ring along a section, leave the rod somewhere warm to dry. Don't paint the finish on too heavy, that would only result in funny looking guide wraps.
If You Take 400 Grit Sandpaper And Judiciously Start Sanding Away, You Will Be Removing Most, If Not All, Of The Resin That Covers The Outer Fibers.
My wife mary lu, who does all the writing on our rods, is very meticulous and very persistent. Building your own fishing rod is much easier, and more affordable, than many fisherman think. Drying times vary tremendously, both varnish brand and room temperature effect drying time.
Remember Now, You Want To Apply A New Coating To The Blank.
I use green lights on the boat. Strip rod back wet flat the blank with 600 grit then go to 800 grit,once wet flatted back give the blank a couple of light coats with car primer allow to dry.wet flat back then give the blank a good few coats of what ever paint you want,allow to dry then wet flat back again then final 2. Totally changed the look and refurbished this fishing rod.i took an old fishing rod, and changed it to look brand new.
Then Paint That Area With Spray Paint.
Once proper color is achieved, mix second component of rod finish per manufactures instructions. 1.) a pole (white base color) 2.) rustoleum glow in the dark paint. Powered by rodbuildingshop.comthis is a short tutorial on how to completely strip a graphite fishing rod to bare blank, in order to be able to rebuild it.
Shop Via Our Stock Color Epoxy Kits Which Include The Side A, Side B And An Optional Can Reducer.
Plus, when you are done building your fishing rod, it will be one that is better quality than many ‘off the rack’ fishing rods, and will be crafted to your specifications, colors, highlights, and preferences. So you figure on prettying up the rod by adding a new paint job. If you are going to coat the whole rod in clear finish most paints will work fine (even cheap spray packs ) however if you want to do it properly and have a really pro finish 2 pack automotive paints are the way to go.
Post a Comment for "How To Paint A Fishing Rod"